HLT-901A Anti-caking agent for sulfur-based compound fertilizers
Chemicalcomposition:
A mixture of surfactants, oils and fats. Made withhigh-quality grease and lighter color.
Specification:
Items | Index |
Appearance | White to light yellow paste |
Smell | No odor at room temperature, slightly fatty odor at high temperature, no irritating odor. |
Full melting point | ≤60℃ |
Density (65℃) | 0.85~0.95 g/cm3 |
Flash point | ≥180℃ |
Remarks: This quality indicator is only for reference, and the specific indicators are subject to the contract.
Usesand characteristics:
★ This anti-caking agent is mainly developedfor the agglomeration of sulfur-based compound fertilizers caused by poorcooling effect and high fertilizer temperature and packaging temperature, andis especially suitable for anti-caking of sulfur-based compound fertilizerswith high fertilizer temperature.
★ It is produced with high-quality oil andhas a light color and does not cause the coloring of white fertilizers.
★ It is also especially suitable foranti-caking of colorless DAP and MAP with good transparency.
★ It can also be used in combination withpowder anti-caking agent for anti-caking of urea-based and chlorine-basedcompound fertilizers.
★ All raw materials are naturalraw materials, which can be fully biodegradable and have no pollution to theenvironment.
Usageand dosage:
Usage:This product is a paste product, which can be packed in cartons or tankers, andis added to the carburetor tank when used and heated to 70-85 °C. It is pumpedinto the parcel cylinder through a metering pump, and the fertilizertemperature at the injection point is guaranteed to be higher than 40°C.
Dosage: According to theclimatic conditions and production process conditions, the addition amount is0.06-0.25%, and the average annual dosage is generally about 0.1%.
Packageand Storage:
Carton packing, 25ibc/carton ortanker transport. Store in a cool, ventilated and dry place, away from fire.
Precautionsfor use:
★ When the anti-caking agent is used, theheating temperature should be controlled below 90 °C to avoid the destruction ofthe active ingredients and reduce the anti-caking effect under high temperatureconditions.
★ Long-term heating of this anti-caking agentmay lead to color darkening, so it should be avoided to store too much materialin the carburetor tank during use.
★ For the coating cartridge with high speedand good coating effect, compressed air atomization can be omitted. However,for the coating cylinder with poor coating effect, the heated hot compressedair should be used for proper atomization to prevent excessive atomizationduring atomization, resulting in the anti-caking agent entering the exhaustsystem.
★ The freezing point of this product ishigh, the material pipeline should have good heat tracing and heatpreservation, and the material pipeline should be connected to compressed airor steam, and the pipeline should be purged with compressed air or steam whenstopping or if necessary, so as to prevent the anti-caking agent fromsolidifying in the pipeline and blocking the pipeline.
SafetyProtection:
★ Wear protective gloves when using and washyour hands with detergent after use.
★ Although this product is non-irritatingand corrosive, contact with skin and eyes should be avoided, especially heatburns.
★ Not edible. Immediately after ingestion,induce vomiting or seek medical attention.
★ After use, the packaging should be neatlyarranged and disposed of as general waste packaging, please do not pile it upnear the fire source.
★ In the event of an accidental fire,extinguish the fire with carbon dioxide, dry powder, or sand.
