HLT-922 Wetprocess phosphoric acid concentrate anti-sedimentation agent
Properties:
An aqueous solution synthesized by a certain process usingspecial chelating surfactants, solubilizers, penetrating agents, crystal phaseinhibitors, and other additives.
Specification:
Items | Index |
Appearance | Light yellow to brownish yellow liquid |
Density (25℃)g/cm3 | ≥1.05 |
pH(1% water solution) | 1.5-4.5 |
Solid Content | ≥22 |
Remarks: This quality indicator is only for reference, and the specific indicators are subject to the contract.
Usage:
★Usedto prevent the formation of sediment during wet process phosphoric acidconcentration. This product can slow down the deposition of scale during theconcentration process, reduce the adhesion of scale, prevent the generation ofscale, and greatly extend the continuous normal production cycle. In general,after using this product, the cleaning cycle can be extended by more than twice..
★Thisproduct can also be added to dilute or concentrated phosphoric acid to greatlyreduce pipeline scaling caused by phosphoric acid transportation. Generally,the pipeline cleaning cycle can be extended by more than twice.
★The scale formed after using thisproduct is loose and easy to remove.
★This productis easily soluble in phosphoric acid solution, with good stability and hightemperature resistance. It has a good inhibitory effect on scaling substancessuch as calcium sulfate, calcium phosphate, and fluorosilicates. It also has acorrosion protection effect on equipment in concentration systems.
★Continuouslyadd into the phosphoric acid slurry with a metering pump, and the dosing pointshould be away from the flocculant or other additives to avoid reducing producteffectiveness. Generally, it is added from the inlet or the outlet of thephosphoric acid pump.
★Dependingon equipment and production conditions, and the composition of phosphate rock,the dosage concentration is generally 0.01-0.02% per ton of phosphoric acid
Packageand Storage:
1000 IBC,or packaging according to customer requirements. Avoid exposure to sunlight orfreezing, store in a cool, ventilated, and dry place, with a shelf life of 12months
SafetyProtection:
★Thisproduct can be diluted with water before use. If layering occurs, mix evenlybefore use. It will not affect the effectiveness of the product.
★Thisproduct is acidic and corrosive. Please wear acid and alkali resistantprotective gloves when using, and clean hands with a cleaning agent after use
★Whenusing this product, avoid contact with skin and eyes. If contacted, immediatelyrinse with plenty of water and seek medical attention if necessary.
★Thecontainers, pumps, and pipelines used for storing and transporting this productshould be corrosion-resistant.
★Thisproduct is not edible. Please induce vomiting or seek medical attentionimmediately after ingestion.
★After use, clean the packaging with water. A small amount ofcleaning water can be added to the system.
★If leaks, rinse with a large amount of water and discharge theflushing water into the phosphoric acid wastewater system
