HLT-928 ammoniumphosphate defoamer for washing
Properties:
An emulsion composed of organic defoamers, emulsifiers,dispersants, and water.
Specification:
Items | Index |
Appearance | Milk white or slightly yellow viscous liquid |
Density (25℃)g/cm3 | 0.80-0.95 |
pH (1% water solution) | 5.0-8.0 |
Solid Content | ≥10 |
Remarks: This quality indicator is only for reference, and the specific indicators are subject to the contract.
Usage:
★This productis suitable for washing and defoaming in diammonium phosphate equipment with a systemof pH of 2-3, specific gravity of 1.49-1.53, and temperature of 100-110 ℃.
★It can alsobe used in industries such as textiles, printing and dyeing, papermaking,coatings, construction, oil fields, oil refining, synthetic resins, rubber,sewage treatment, etc.
★This productis an organosilicon defoamer that is resistant to high temperature and acid.
★Fastdefoaming speed, long defoaming time, and low dosage.
★Good watersolubility, non-toxic, odorless.
★Mix withwater in a ratio of 1:10-20 and directly add into the system by impact orcontinuously dosing using a metering pump. Continuous dosing can result in lessdosage and better defoaming effect.
★According tothe grade of phosphate ore powder and the defoaming system, the dosage shouldbe less than 0.45kg/ton fertilizer.
Packageand Storage:
1000IBC, or packaging according to customer requirements. Avoid exposure tosunlight or freezing, store in a cool, ventilated, and dry place, with a shelflife of 6 months
SafetyProtection:
★Iflayering occurs, mix evenly before use. It will not affect the effectiveness ofthe product.
★When using this product, avoid contact withskin and eyes. If contacted, immediately rinse with plenty of water and seekmedical attention if necessary.
★Thisproduct is not edible. Please induce vomiting or seek medical attentionimmediately after ingestion.
★If leaks, rinse with a large amount of water and discharge theflushing water into the phosphoric acid wastewater system
